Self-locking crimp nuts with nylon ring : a reusable threadlocker for thin sheet metal

Titanox self-locking crimp nuts with nylon ring are similar to standard threadlockers except that they are reusable. They retain their braking properties. This allows repeated use of the nut while maintaining the strength of the threadlocker and a high tightening torque. They avoid the risk of loosening and unscrewing, even under conditions of extreme tension.

The assembly is durable, with deformation of the sheet metal rather than the insert. The fastener is reliable and resistant to tearing, mechanical stress and vibration, depending on the nature and dimensions of both the insert and the support.

Quick and easy installation

Installation is particularly quick and easy in punched or drilled holes, helping to optimize productivity. Simply apply pressure to crimp the skirt completely into the sheet metal. This can be done using a crimping press, such as Titanox’s T60 and T90 models. It is important to note that the length of the skirt must be less than the thickness of the sheet metal, to ensure optimum hold and avoid deformation of the insert.

Once the nut is installed on one side, the opposite side remains smooth.

Available from M3 to M5 in steel and stainless steel.

A wide range of applications

Crimp nuts are ideal for fine sheet metal subcontractors, stampers and metal component manufacturers. Crimp fasteners can be used for a wide range of applications in virtually all industries. These include the medical, electronics and aerospace industries.

All technical information on Titanox self-locking crimp nuts with nylon ferrules is available in the Titanox crimping catalog, which can be downloaded from the site.

For further information or questions specific to your project, our experts are at your disposal.